Lincoln Electric pmn manual Installation, Technical Specifications Power MIG

A-1 INSTALLATION A-1

TECHNICAL SPECIFICATIONS – POWER MIG 215

INPUT – SINGLE PHASE ONLY

Standard Voltage/Phase/Frequency

208/230/1/50/60 Hz

Duty Cycle 30% 40% 60%

Welding Current Range

30 – 250Amps

Input Current @ 170 Amp Rated Output (With 115V receptacle loaded to 15A)

39/35 Amps

RATED OUTPUT

Amps

215Amps

190Amps

170Amps

OUTPUT

Maximum Open Circuit Voltage

35 Volts

Input Current @ 215 Amp Rated Output (With 115V receptacle loaded to 15A)

45/41 Amps

Volts at Rated Amperes

22Volts

23Volts

24Volts

Welding Voltage Range

13.5-24 Volts

RECOMMENDED INPUT WIRE AND FUSE SIZES

					75°C Copper Wire		75°C Copper Wire
		Input Ampere			in Conduit		in Conduit
Input Voltage/	Fuse or Breaker		Rating On		AWG (IEC) Sizes		AWG (IEC) Sizes
					(For lengths		(For lengths
Frequency (Hz)	Size (Super Lag)		Nameplate		up to 100 ft.)		exceeding 100 ft.)
208/50/60	60		45A		10 (6 mm2)		8 (10 mm2)
230/50/60	60		41A		10 (6 mm2)		8 (10 mm2)
	NOTE: Use #10 AWG Grounding Wire
	WIRE SPEED RANGE
Wire Speed			50 – 700 IPM (1.27 – 17.8 m/minute)
	PHYSICAL DIMENSIONS
Height	Width			Depth		Weight
31.79 in	18.88 in			38.78 in		210 Ibs
808 mm	480 mm			985 mm		95 kg

TEMPERATURE RANGES

OPERATING TEMPERATURE RANGE

-4°F to 104°F(-20°C to +40°C)

STORAGE TEMPERATURE RANGE

-40°F to 185°F(-40°C to +40°C)

POWER MIG 215