The Main tab shows all the Ethernet Powerline Adaptor that are logically connected to the current
computer where the Management Utility is running.
; Local Device(s) on your computer: This shows all local Ethernet Powerline Adaptor found
connected to the computer’s LAN card. In most cases, only one device will display in this panel.
Click and select the local device shown on the screen then click “Connect” tab to manage the
Ethernet Powerline Adaptor. The status message will be shown above the “Connect” button
indicates that your PC is connected to the same device. Once the chosen Ethernet Powerline
Adaptor is properly connected, this Management Utility will automatically scan the power line
periodically for any other existing powerline devices.
; “x” Powerline Devices detected: This display all the Ethernet Powerline Adaptor found on the
current logical network. “x” shows the number of remote Ethernet Powerline Adaptor discovered
by this Management Utility.
; Network Type: Displayed the type of logical network: “Public” or “Private”.
Ethernet Powerline Adaptor 12