Step 4 - Power off the LINDY Dual/Quad PRO
Remove both power supplies from the Dual / Quad PRO.
Step 5 - Power on the LINDY Dual/Quad PRO with the UPGRADE switch ON
Attach the power adapter to the LINDY Dual/Quad PRO whilst the UPGRADE switch is ON. The green USER display should now show a lower case 'u'. This indicates that the LINDY Dual/Quad PRO is ready to be upgraded.
The display should now show:
Step 6 - Run the upgrade program
The latest version of the LINDY Dual/Quad PRO firmware is available from the LINDY Electronics Ltd website at www.lindy.co.uk. The upgrade files will be supplied to you as a group and consist of several files as explained below. These files should be downloaded to the same directory on your computer.
1)A universal upgrade program
LDQP.EXE
2)Binary code files for each of the processors within the LINDY Dual/Quad PRO (up to 3)
e.g. 4X16A129.HEX
4X16B129.HEX
4X16C129.HEX
These files use the following naming scheme. The first four characters are the model type (e.g. 4X16 is a LINDY Dual/Quad PRO 4 with 16 computer ports). The fifth character is the processor designation. The last three characters represent the firmware release version (e.g. 129 equals version 1.29).
LINDY Dual/Quad PRO | Installation and Use | Page 62 |
