![](/images/new-backgrounds/1107240/10724013x1.webp)
English Manual
Step 1
Switch off all the computers to be attached.
Step 2 – Local Console
Connect the keyboard, monitor and mouse directly to the sockets of the LINDY CPU Switch labelled Console Port. If your keyboard has a 5 Pin DIN connector you can use a PS/2 adaptor (LINDY No. 70129).
Please note: Serial Mice with 9 Way D or USB connectors are not supported and cannot be used!
Step 3 – Remote Console (PXT only)
To Power
Adapter
1.Use CAT5 or higher, straight through type network cable. The maximum connection distance is 150m (500 feet)
2.Plug one end of the cable into the
3.Connect a monitor, keyboard and mouse to the relevant ports on the Remote Receiver module
4.Connect a local workstation computer to the relevant ports on the Remote Receiver module
5.Connect the power adapter to the socket on the Remote Receiver module
5