Manual | English |
Single Stage Installation
In a single stage installation no additional video splitters are daisy chained down from the first unit. To set up a single stage installation, do the following:
1.Use a high quality HD 15 Male/Female video extension cable to connect the PC’s video port to the ‘VIDEO IN’ port of the video splitter.
2.Use high quality HD 15 Male/Male video cables to connect the ‘VIDEO OUT’ ports of the video splitter to the monitors, unless your monitors have got mounted video cables on them in which case you would need video extension cables.
3.Plug the power adapter into an AC source; and then plug the power adapter cable into the video splitter’s power jack.
4.Power up the video splitters, power up the monitors and power up the PCs in that order.
Daisy Chaining
To provide video display for more monitors than the number of available ‘VIDEO OUT’ ports on your video splitter, additional video splitters can be daisy chained. Use a high quality HD 15 Male/ Female video extension cable to connect an available ‘VIDEO OUT’ port on the higher level video splitter to the ‘VIDEO IN’ port of the lower level video splitter.
As many video splitters as ports are available on the highest level splitter can be chained. 2, 4 and
Note: If you connect a DDC type monitor to ‘VIDEO OUT’ port No. 1, all other monitors must be able to support the highest resolution that the DDC monitor can provide!
Technical Features:
•Bandwidth 450 MHZ
•Resolution up to 2048 x 1536
•Enhances cable distances up to 55m
•Supports DDC, DDC2, DDC2B (Port1 only)
•Daisy chainable
•Full metal housing
•Small form factor
For additional specs, see last page
Please note: we recommend using LINDY Premium or Premium Gold cables in conjunction with our VGA Splitter Pro range. Please visit our website to view the full range