![](/images/new-backgrounds/1165416/16541613x1.webp)
Technical Data / CE/FCC
Function |
| Specification |
|
| |
Cable length | 55m max. when using LINDY Premium | |
(Splitter to monitor) | Gold SVGA cables | |
|
| |
Signal | VGA, SVGA, XGA, | |
|
| |
Video input connectors | 1 x HD 15 Male | |
|
| |
| 2 x HD 15 Female (Art. No. 32571) | |
Video output connectors | 4 x HD 15 Female (Art. No. 32572) | |
| 8 x HD 15 Female (Art. No. 32573) | |
|
|
|
Operating temperature | 4 - 50°C |
|
Storage temperature | °C | |
|
|
|
Humidity | 0 – 80% | RH, |
|
| |
Power supply | 5VDC, 1000mA | |
|
| |
|
|
|
Housing | Metal |
|
|
|
|
CE Statement
This device complies with the European Regulations for Electromagnetic Compatibility (EMC) of the European Union and it is equipped with the CE mark. This unit has to be used with high quality shielded connection cables. Only if these high quality shielded cables are used it can be sure that the EMC compatibility is not adversely influenced.
FCC Statement
Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced technician for help
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.