Lindy 32825, 32856 English Manual, Operation, Hotkey control, PC USB & PS/2 PC Keyboards only

English Manual

ENG 3

For bus powered operation with low power USB devices attached, at least two computers should be connected, and be powered up. Bus powered operation also depends on the number of USB devices attached, and how much current they draw from the USB bus.

Alternatively, you can attach a regulated 5V DC power supply to the CPU Switch LITE USB 2.0 or you can connect your USB devices via a self powered USB 2.0 hub.

Operation

To switch between the connected computers press the button on the CPU Switch LITE USB 2.0 or use a hotkey from your PC keyboard.

Hotkey control

(PC USB & PS/2 PC Keyboards only!)	Scroll
	Lock

To send commands to the CPU Switch the key must be pressed twice within 2 seconds. This puts the CPU Switch into command mode. You will hear a beep for confirmation. Any further key presses must follow within another two seconds. If not, the CPU Switch exits from command mode and any further key presses are transferred to the selected computer.

Note: Hotkey switching is available when using either a PS/2 or USB PC keyboard only! It is not available when using Mac and Sun keyboards! Advanced Hotkey control is only available when using a PS/2 PC keyboard!

USB PC Keyboard Controls

To switch USB Keyboard, Mouse, Monitor & USB devices (together) between computers

Within 2 seconds

Scroll	+	Scroll	+	↑	=	Previous Channel
			or
Lock		Lock
				↓
	+		+		=	Next Channel

Note: This is the only Hotkey control available when using USB PC Keyboards. For Advanced Hotkey control you must use a PS/2 PC keyboard!

Advanced Hotkey Control (PS/2 PC Keyboards only!)

To switch PS/2 Keyboard/Mouse, Monitor & USB devices (together) between computers

Within 2 seconds

Scroll	+	Scroll	+	↑	=	Previous Channel
			or
Lock		Lock
				↓
	+		+		=	Next Channel
Select PC port :
Scroll	+	Scroll	+	Port No.		= To select PC1 ~ PC2 or ~ PC4 directly
Lock		Lock		1…2/4