![10/100 N-WAY Switch](/images/new-backgrounds/118766/1187661x1.webp)
10/100 N-WAY Switch
Fast Ethernet Switching Hub
5 Port Version: | 32981 |
8 Port Version: | 32982 |
Installation and Use | English |
Benutzerhandbuch | Deutsch |
Manuel | Français |
Manuale Uso | Italiano |
LED Indicator Meaning
|
| LED | Status | Colour | Description |
|
| Power | On | Green | The switch is powered On |
|
| 10/100 | On | Yellow | The port is connected at 100Mbps |
|
|
|
| The port is connected at 10Mbps, if the LINK/ ACT | |
|
| Speed | Off |
| |
|
|
| LED is on or flashing | ||
|
|
|
|
|
LNK | On | Green | A valid link to a device is established | |
Flashing | Green | The port is receiving or transmitting data | ||
/ACT | ||||
Off |
| No link established, no powered on device connected | ||
|
|
LINDY Nr. 32 981, 32 982
© LINDY ELECTRONICS LIMITED &
English Manual
Overview
The LINDY 10/100 Fast Ethernet Switches are a compact desktop or wall mount design. The base incorporates key hole slots for wall mounting. The switches use the most recent technology features like Auto
Features
•Ethernet IEEE 802.3
•10/100Mbit/sec, Full or
•Store & Forward architecture
•Forwarding/Filtering Rate 148,800 packets / sec.
•MAC address table: 1K, Buffer 128KByte
•Status LEDs for Power, 10/100Mbit, Link/Activity
Package Contents
!This manual
!5/8 port LINDY 10/100 NWAY Switch
!AC/DC power supply
Operating Environment
Do not place any objects on top of the Switch. Do not cover the vents of the unit. Do not place the units near a heating source. Ensure good ventilation. For
Temperature
Installation and Use
Connect the power supply to the mains and to the Switch. Connect the Switch to your network devices using standard patch lead. Auto-
Please regard that the maximum length of any connection between the switch and a device is 100m (including all cables). For 100Mbps connections use at least Cat.5 STP/UTP cables!
Troubleshooting
•Make sure the POWER LED is lit. If not either the power supply or the switch (or LED) might be faulty. Contact your dealer in this case.
•If you connect any powered device to a port the LINK/Activity LED of this port should light. If not use another patch cable and check that the device you have connected is powered on and it’s network port is active.
•Make sure all network and patch cables are STP or UTP and are not broken. Make sure any distance between the Switch and a device is 100m or less.
Deutsches Benutzerhandbuch
Übersicht
Die LINDY 10/100Fats Ethernet Switches sind sehr kompakt und Einsatz an Orten mit begrenztem Platzangebot geeignet. Sie basi auf der neuesten Technologie mit Features wie
Eigenschaften
•Ethernet IEEE 802.3
•10/100Mbit/s,
•Store & Forward Architektur
•Forwarding/Filtering Rate 148,800 Pakete/s
•MAC Adress Tabelle: 1K, Speicher 128KByte
•Status LEDs: Betriebsbereit, Verbindung/Link, Geschwindig
Lieferumfang
!Dieses Handbuch
!5/8 Port LINDY 10/100 NWAY Switch
!Externes Steckernetzteil
Einsatzbedingungen, Umgebung
Stellen Sie keine Gegenstände auf den Switch. Stellen Sie de Switch nicht in die Nähe von Wärmequellen. Sorgen Sie für ausreichende Belüftung, verdecken Sie nicht die Luftschlitz Für die Verwendung in geschlossenen Räumen, Temperatur bereich
Installation
Stecken Sie das Steckernetzteil in die Steckdose und verbinden S mit dem Switch. Schließen Sie dann Ihre Netzwerkgeräte mit LIND Patchkabeln an. Die
Fehlersuche
"Wenn die POWER LED nicht leuchtet ist entweder das Net oder der Switch (bzw. die LED) defekt. Wenden Sie sich an Ihren Händler.
"Bei Anschluss eines eingeschalteten Netzwerkdevice an de Switch sollte die LINK/ACTIVITY LED des Ports aufleuchten. Fal nicht, verwenden Sie einen anderen Port, ein anderes Patchkabel überprüfen Sie das Gerät welches Sie anschließen wollen.
"Stellen Sie sicher, dass alle verwendeten Patchkabel einwan und nicht geknickt oder gebrochen sind.