User Manual
Introduction
Thank you for purchasing the LINDY 8 Port HDMI 1.3b Splitter. This device is a high performance HDMI amplifier and splitter which allows a single HDMI source to be displayed simultaneously on up to 8 different displays.
Package Contents
•LINDY HDMI 1.3b Splitter
•5V DC Multi Country PSU
•This manual
Features
•HDMI 1.3b, HDCP 1.1 and DVI 1.0 compliant
•Deep colour up to 8 & 12 bit, 1080p (24/60Hz)
•Splits a single HDMI source without any signal loss for use with up to 8 displays
•Supports
o Dolby TrueHD
o Dolby Digital Plus o
•When used with computers, supports
•Supports xvYCC and CEC bypass
•Built in EDID simulator and HDCP keyset allows each output to work independently when connecting to an HDMI display
•Supports both DVI source and display devices when using DVI/HDMI adapter cables
•The input/output distances can be up to 15m with 8 bit colour depth and 10m with 12 bit colour depth (when using LINDY Premium Gold Cables)
Connections & Operation
Make sure all devices are switched off before connecting any equipment! Once all the connections have been made, switch on the devices in this order: displays, HDMI Splitter, source device.
HDMI Output – Connect your displays to the 8 HDMI output ports
Note: When using both 8 & 12 bit displays, make sure the splitter is set to 8 bit. If all the displays are 8 bit or 12 bit then set the splitter accordingly. The splitter will not detect individual colour depths on your displays.
8/12 Bit – Supports 8/12 bit deep colour. Only available when EDID setting is in STD mode
2 CH/Multi CH – Supports 2 Channel or Multi Channel Audio. Only available when EDID setting is in STD mode
STD/TV – STD mode will allow you to adjust deep colour & audio channels. TV mode will allow the EDID information to be sent from the source
Sys Reset – System reset function
Power – Power Switch
HDMI Input – Connect to your source equipment
