User Manual | English |
Introduction
Thank you for purchasing the LINDY USB 2.0 4 Port Sharing Hub! The LINDY USB 4 Port Sharing Hub provides you with an easy,
Package Contents
LINDY USB 2.0 4 Port Sharing Hub
Power Supply
User Manual
Features
Fully compliant with USB 2.0 and backwards compatible with USB 1.1
Provides 4
Supports 480/12/1.5 Mbps data transfer modes
Supports
Automatically select self or
Supports Windows ME/2000/XP/Vista and Mac OS 8.6/9 or later
Installation
Using a USB Type A – USB Type B cable connect the first of your computers to Port A on the hub, then connect the second computer in the same way to port B. There is a slide switch on the hub which allows you to choose which PC has access to the USB hub, simply move the switch between A and B to switch between ports. You are now ready to start using the LINDY USB 4 Port Sharing Hub.
The hub provides 5V DC, 500 mA power which is shared across all for ports, if you are using high power consumption USB peripherals, then it is recommended that you use the hub with the power supply attached. Using the supplied power supply the hub will provide 5V DC, 500 mA power on each of the four ports.
Note If you are daisy chaining hubs, all hubs except the last one in the chain, the one farthest from the PC, must use a power supply; only the last hub in the chain may use Bus powered mode.
Mode | Power In to Unit | Power Out to Ports | |
Powered | Via a 5V 2A DC Power | Each one of the unit’s four downstream ports is | |
Adapter (Inner + , Outer | Supplied with DC +5V, 500mA (max) power | ||
| |||
Bus | From the PC’s USB Host | All four downstream ports (in total) receive DC | |
Controller via the USB cable | +5V, 500mA (max) power | ||
|
