Lindy 70538 user manual Verifying The installation under Windows 98SE and ME

Reboot the system if your Windows ME drive is connected on the

SiI 3112 Controller.

4.8.Verifying The installation under Windows 98SE and ME

Follow the instructions in this section to verify that the controller was installed correctly.

1.Right click on 'My Computer' icon, select 'Properties', left click on 'Device Manager' tab.

2.Double click on 'System devices', then left click on 'PCI standard PCI-to-PCI bridge'. If there is no yellow '!' or '?' in front of 'PCI standard PCI-to-PCI bridge' the driver has started correctly.

3.Double click on '1394 Bus controllers' If there is no yellow '!' or '?' in front of ' NEC Firewarden OHCI Compliant IEEE 1394 Host Controller' the driver has started correctly.

4.Double click 'Universal Serial Bus Controllers', If there is no yellow '!' or '?' in front of

NEC PCI to USB Enhanced Host Controller NEC USB Open Host controller

NEC USB Open Host controller USB Root Hub

USB Root Hub

The driver has started correctly.

5.Double click on 'SCSI Controllers', If there is no yellow '!' or '?' in front of 'Silicon Image SiI 3112 SATARaid Controller', the driver has started correctly.

6.To view information about the devices attached to the controller, right click the 'Devices' and select Properties from the context menu, then select the tab labeled 'General'.

- 11 -