Lindy 70538 user manual Windows XP installation, Next

'Next'.

4.Under 'Optional search locations' insure that 'CD-ROM drives' is only checked.

5.Insert the CD Driver into CD-ROM drive and click 'Next'.

6.When the wizard indicates that it found a driver for the device click 'Next'.

7.The wizard will now copy the required files to the system and start the Driver. After starting the driver the wizard will display a completion dialog, click 'Finish' to exit the wizard.

8.Windows will display the 'Found New Hardware Wizard'. Click 'Next'.

9.Select 'Search for a suitable driver for my device (Recommended)' and Click 'Next'.

10.Under 'Optional search locations' insure that 'CD-ROM drives' is checked.

And Click 'Next'.

11.When the wizard indicates that it found a driver for the device click 'Next'.

12.If the 'Digital Signature Not Found' dialog appears, click 'Yes' to continue installing the driver.

13.The wizard will now copy the required files to the system and start the Driver. After starting the driver the wizard will display a completion dialog, click 'Finish' to exit the wizard.

4.3. Windows XP installation

1.Power off the system. Insert Combo Card into an available PCI slot. Power up the system.

2.During OS boot up, Windows will display the 'Found New Hardware Wizard'. Universal Serial Bus (USB) controller.

3.Select 'Install the software automatically (Recommended)' and insert CD driver into CD-ROM drive. And Click 'Next'.

4.If the 'Hardware Installation' dialog appears, click 'Continue Anyway'.

5.The wizard will now copy the required files to the system and start the Driver. After starting the driver the wizard will display a completion Dialog, click 'Finish' to exit the wizard.

6.Windows will display the 'Found New Hardware Wizard'.

7.Select 'install the software automatically (Recommended)'. Click 'Next'.

8.If the 'Hardware Installation' dialog appears, click 'Continue Anyway'.

9.The wizard will now copy the required files to the system and start the Driver. After starting the driver the wizard will display a completion Dialog, click 'Finish' to exit the wizard.

4.4.Verifying The installation under Windows 2000 and XP

Follow the instructions in this section to verify that the controller was installed

- 7 -