4.0 Pin Assignment
5.0 Driver Installation
Windows NT4.0
1.Power up the system.
2.After inserting the Serial Card Bus into PCMCIA Type II slot successfully, please follow the instructions as below:
3.Please run the “Install_Serial.exe” program locate within folder of the attached driver CD :
\PCMCIA\IO\CBS2000X\WinNT4\Install_Serial.exe
4.When the installation application starts, click “Next” to continue,
5.Ensure “Install” is selected, then click “Next”.
6.Click “OK” to accept the license agreement.
7.The system will install the driver and start it. The ports are immediately ready for using.
3
