PCI 1S (16C950 128 FIFO)
User Manual | English |
LINDY No. 51235
www.lindy.com
Installation
1.Turn off the power of your computer and remove the power cable
2.Install the PCI card into an available PCI slot in your computer
3.Connect the peripheral ie Printer, Modem, etc. to the adapters port
4.
PCI device listing display (for example…)
Bus | Device | Func | Vendor ID | Device | Device Class | IRQ |
No | No | No |
| ID |
|
|
0 | 7 | 1 | 8086 | 7010 | IDE Controller | 14 |
0 | 13 | 0 | 1409 | 7168 | Simple COMM. | 10 |
|
|
|
|
| Controller |
|
If the Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error occurs, please try another PCI slot.
Once the hardware has installed correctly you can start installing the software from the driver CD.
Pin Assignments
Serial 9 Pin male connector pin assignments:
Serial 9 Pin male connector :
Pin | Signal | Pin | Signal | Pin | Signal | Pin | Signal |
1 | CD | 4 | DTR | 6 | DSR | 8 | CTS |
2 | RD | 5 | GROUND | 7 | RTS | 9 | RI |
3 | TD |
|
|
|
|
|
|
Introduction
Thank you for purchasing the LINDY PCI one Port Serial. This card is equipped with one high speed
The serial ports include 128Byte FIFO with speeds up to 921Kb/Sec.
Port Specification
Serial Port:
∙Chipset: Oxford uPCI952, 128Byte FIFO
∙Compatible chips: with 16C950, 16C750, 16C650, 16C550, and 16C450.
∙IEEE standard:
∙Max. Speed: Up to 921Kb/Sec (HYPER Terminal program)
Package Contents
1 x LINDY PCI 1S Card
LINDY User manual
LINDY Driver CD
Technical Specifications
∙Compatibility: PCI 32Bit card for 486, 586, Pentium,
∙Operating system: WIN 9.x, ME, NT, 2000, XP, 2003 Server, VISTA, WIN 7, LINUX,
∙Chipset: Oxford uPCI952
∙Connections:
∙ Serial: 1 x DB9 Male
∙PCB: 2 Layer / 120 x 76 mm
