Questions and Answers
Troubleshooting Guide…
Here are some helpful hints to diagnose problems that you may have with your LINDY VGA Converter Lite. Most of the problems can be corrected with little effort.
Problem | Solution | |
No display on the | ♦ Check all the connections again as shown in the manual. | |
television when using | ♦ Check to see if the LINDY VGA Converter Lite power is ON. | |
the LINDY VGA | ♦ | Verify that the correct AV channel is selected. Some modern |
Connector Lite |
| TV’s have several AV channels. |
| ♦ For Notebook users please switch your Notebook to external | |
|
| monitor display mode |
| ♦ As specified by IBM, some systems may require that the | |
|
| monitor is present and connected when the system is powered |
|
| up. |
TV picture is distorted | ♦ Make sure that all the cables are well connected. | |
| ♦ Make sure that FREEZE is set to OFF while you power on the | |
|
| LINDY VGA Converter Lite.. |
TV display in black | ♦ Check whether your TV system (PAL or NTSC) is selected | |
and white only |
| correctly. |
The LINDY VGA | ♦ | The computers refresh rate or resolution is set to high. Try |
Converter Lite can’t |
| lowering the refresh rate first. If this fails then try lowering the |
operate at higher |
| resolution. |
resolutions |
|
|
Computer graphic | ♦ Each graphic’s video output is slightly different from others. | |
doesn’t fit the TV |
| Use the Direction buttons on the main unit. |
screen |
|
|
© LINDY ELECTRONICS LTD | Installation & Use English – English Guide | Page 7 |
