Linear RV5060 installation manual Disc Warnings, Handling and Cleaning, Disc Cleaning

Models: RV5060

1 32
Download 32 pages 6.3 Kb
Page 13
Image 13
Disc Warnings

RV5060-UM Rev. A 5/12/10 9:18 AM Page 13

Disc Warnings

Handling and Cleaning:

Dirt, dust, scratches and warping disc will cause non operation.

Do not place stickers on disc or scratch disc.

Do not warp discs.

A disc should always be kept in its case when not in use to prevent damage.

Do not place discs in the following places:

1.Direct sunlight.

2.Dirty, dusty and damp areas.

3.Near car heaters.

4.Car seats or dashboard.

Disc Cleaning:

Label side up

Do not touch the underside of the disc

Do not bend

Use a dry soft cloth to wipe disc the surface. If the disc is quite dirty, use a soft cloth slightly moist with isopropyl (rubbing) alcohol. Never use sol- vents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Note: A disc may become somewhat scratched (although not enough to make it unusable) depend- ing on handling and conditions in the usage envi- ronment.

Wipe the disc from the center toward the outside edge

Preparing New Discs with Rough Spots:

A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown. To do this, press the side of the pen or pencil against the inside and outside edges of the disc.

Rough spots on

outside edge Rough spots on inside edge

Ball point pen or pencil

13

Page 13
Image 13
Linear RV5060 installation manual Disc Warnings, Handling and Cleaning, Disc Cleaning, Preparing New Discs with Rough Spots