Linksys E1000-RM manual Status Router, Status Local Network

Linksys E1000

Firmware Upgrade

Before upgrading the firmware, download the Router’s firmware upgrade file from the website, www.linksys.com/support..

Please select a file to upgrade the firmware  Click Browse and select the firmware upgrade file..

Start to Upgrade  After you have selected the appropriate file, click this button, and follow the on-screen instructions..

WARNING: Do not interrupt the upgrade process.. You should not turn off the power or press the Reset button during the upgrade process.. Doing so may disable the Router..

Status > Router

The Router screen displays information about the Router and its current settings..

Status > Router

Router Information

Firmware Version  The version number of the Router’s current firmware is displayed..

Firmware Verification  The unique identifier of the firmware is displayed..

Current Time  The time set on the Router is displayed..

Internet MAC Address  The Router’s MAC address, as seen by your ISP, is displayed..

Host Name  The Host Name of the Router is displayed (if it was entered on the Setup > Basic Setup screen)..

Domain Name  The Domain Name of the Router is displayed (if it was entered on the Setup > Basic Setup screen)..

Chapter 3: Advanced Configuration

Internet Connection

This section shows the current network information stored in the Router.. The information varies depending on the Internet connection type selected on the Setup > Basic Setup screen..

For a DHCP connection, select Release IP Address or Renew IP Address as appropriate to release or renew a DHCP lease.. For a PPPoE or similar connection, select Connect or Disconnect as appropriate to connect to or disconnect from the Internet..

Click Refresh to update the on-screen information..

Status > Local Network

The Local Network screen displays information about the local network..

Status > Local Network

Local Network

Local MAC Address  The MAC address of the Router’s local, wired interface is displayed..

Router IP Address  The Router’s IP address, as it appears on your local network, is displayed..

Subnet Mask  The Subnet Mask of the Router is displayed..

DHCP Server

DHCP Server  The status of the Router’s DHCP server function is displayed..

Start IP Address  For the range of IP addresses that can be used by devices on your local network, the starting IP address is displayed..

End IP Address  For the range of IP addresses that can be used by devices on your local network, the ending IP address is displayed..

Wireless-N Router 35