Linksys EZXS16W manual Chapter Product Overview, Front Panel, Back Panel

Chapter 1

Product Overview

Chapter 1:

Product Overview

Thank you for choosing the EtherFast® 10/100 5/8/16-Port Workgroup Switch. The EtherFast® 10/100 Workgroup Switch is an easy, affordable way to build a fast, reliable desktop Ethernet network. Connect up to 5, 8, or 16 devices—computers, storage, modems and printers— with performance that helps you get more done faster.

Front Panel

Front Panel of EZXS55W

Front Panel of EZXS88W

Front Panel of EZXS16W

Power  (Green)  Each time your Switch powers up, it will run a diagnostic/self-test. After the test, the Power LED will light up and will stay on while the Switch is powered on.

Link/Act  (Green) This LED lights up solid when the Switch is connected to a device through the Ethernet port. If the LED is flashing, the Switch is sending or receiving data over that port.

100  (Green) This LED indicates the speed of the connection over the Ethernet port. When the LED lights up, the speed is 100 Mbps. When the LED does not light up, the speed is 10 Mbps.

Full/Col  (Yellow) This LED indicates if the Ethernet port is in full or half duplex mode.When the LED is lit, the mode is Full Duplex. When the LED is not lit, the mode is Half Duplex. When the LED flashes, the port has a data collision error; check if your cabling is installed properly and all connections are secure.

Back Panel

Back Panel of EZXS55W

Back Panel of EZXS88W

Back Panel of EZXS16W

Ethernet 1-5 (EZXS55W),

Ethernet 1-8 (EZXS88W),

Ethernet 1-16 (EZXS16W)  The Ethernet ports connect the Switch to a wired PC or other Ethernet network device.

Uplink (EZXS55W and EZXS88W only)  The Uplink port connects the Switch to a router or to another switch.

MDI/MDIX (EZXS16W only)  When the MDI/MDIX button is pressed in, port 16 will function as an Uplink port. When this button is not pressed in, port 16 functions as a normal 10/100 port.

Power  The Power port is where you will connect the power adapter.

NOTE TO USERS OF 10/100 5- OR 8-PORT SWITCH (EZXS55W OR EZXS88W): If you connect a router or additional switch to the Uplink port, then you cannot use the numbered port next to the Uplink port (port 5 on the 5-Port Switch or port 8 on the 8-Port Switch will be inactive). The two ports are wired together, so they cannot be used simultaneously.

EtherFast 10/100 5/8/16-Port Workgroup Switch 1