Call Park Support

•Call Park and Call Un-Park allow the user to park any call from an LVS 9000 phone and pick it back up from the same or a different LVS 9000 phone.

•To Park a Call, Follow These Steps:

–1. While the call is connected, press the “park” soft key on your LVS 9000 phone

–2. Enter the parking lot number on which to park the call.

–3. Result: Call is parked and you are disconnected from the call.

–4. If configured, the parked caller is listening to music.

–By default the Park * code is: 38

•To Pickup a Parked Call (Sometimes Referred to as “Un-parking” a Call), Please Follow These Steps:

–1. Press the “unpark” soft key or dial the corresponding *code on your LVS 9000 phone.

–2. Enter the parking lot number where the call is parked.

–3. Result: You are connected with the parked call.

–By default the Unpark * code is: 39


© 2006 Cisco Systems, Inc. All Rights Reserved.	Linksys/Cisco Proprietary – All Content Subject To Change – Not a Warranty	57
© 2006 Cisco Systems, Inc. All Rights Reserved.