Technical Specifications1
The lead-acid batteries typically used in a
UPS are considered viable as long as they
can maintain backup times of at least half
that of new batteries. The illustration to the
right shows that batteries that are constantly
trickle charged (as are virtually all other UPS
batteries on the market today) reach the end
of their useful life in less than half the time
of batteries charged using ABM. ABM uses a
patented three-stage charging technique that
not only doubles battery service life, but
also optimizes battery recharge time and
provides up to a 60-day advanced notifi-
cation of pending end of useful battery life.
Advanced Battery Management (ABM™) Technology Doubles Battery Service Life
Data based upon tests performed by an independent battery manufacturer.
ELECTRICAL INPUT
Voltage 200, 208, 220, 230, & 240 Vac user-selectable;
see Model Selection Guide for default settings
Normal Voltage ±20% of nominal voltage without using batteries
Range
Extended Voltage 160-288V without using batteries (set via front panel)
Range
Frequency 50/60 Hz, ±3 Hz (+5/-3 Hz with extended voltage range)
Connection Hardwired
Efficiency 96%
ELECTRICAL OUTPUT
Power Out 6000 VA/6000 Watts
Voltage Range ±10% of nominal voltage
(online)
Voltage Range ±5% of nominal voltage
(on battery)
Wave Form Sine Wave
(on battery)
Frequency Same as input (±0.5% during battery operation)
Connections Receptacles or hardwired; see Model Selection Guide
Max Current 29A at 208 Vac; 26A at 230 Vac
Output Protection Resettable circuit breakers
BATTERY
Type Maintenance-free, sealed, valve-regulated lead-acid
(VRLA), (28), 12V 5 AH
Extended Batteries Maximum of 2 Extended Battery Modules (EBMs)
Backup Time See Battery Run Times table
Recharge Time <3 hours to 80% usable capacity
Extended Battery <10 hours to 80% usable capacity
Recharge Time
COMMUNICATIONS
Serial Ports (2) Serial communication ports for use with power
management software and installable option cards,
including ConnectUPS SLC-EM SNMP Adapter and the
Port Expander Card
User LEDs Normal Operation (green), On Battery (yellow),
On Bypass (yellow), and Alarm (red)
LCD Two-line LCD with three button control
LCD Languages Danish, Dutch, English, French, German, Spanish,
Italian, and Japanese
Front Panel Buttons On, Off, and Alarm Silence/Self Test
Communications 6-foot communication cable included
Cable
ENVIRONMENTAL AND SAFETY
Operating 10°C to 40°C (25°C for optimal performance)
Temperature
Transit Temperature -20°C to 55°C
Storage Temperature 0°C to 25°C
Humidity (Operation) 20 to 80% (noncondensing)
Humidity 5 to 95%
(Non-operating)
Operating Altitude 0 to 10,000 feet (non-operating: 0 to 30,000 feet)
Audible Noise 55 dBA at 1 meter
Safety Markings UL, CSA, NOM. Models PW5140 6000i and
PW5140 6000 HW also CE and VDE
Safety UL1778; CSA22.2 No.107.1,No.107.2,No.950; CB
Certifications Bulletin No.86AI; EN50091-1; EN60950;
EMKO-TSE207/95; NOM-019-SCFI-1993
EMC Markings FCC-A; CISPR-A; VCCI
Immunity IEC 801-2, IEC 801-3, IEC 801-4, IEC 801-5
Surge Suppression Conforms to IEEE 587B and ANSI C62.41
REPO Port Meets NEC code 645-11 intent and UL requirements