Linksys PAP2-NA manual Getting to Know the Phone Adapter, Back Panel Ports

Models: PAP2-NA

1 33
Download 33 pages 13.67 Kb
Page 7
Image 7

Phone Adapter with 2 Ports for Voice-over-IP

Chapter 2: Getting to Know the Phone Adapter

Back Panel Ports

The Phone Adapter’s ports are located on the back panel.

 

Figure 2-1: Back Panel

PHONE 1 Port

For your primary Internet phone line, the PHONE 1 port allows you to connect your telephone

 

to the Phone Adapter using an RJ-11 telephone cable (not included).

PHONE 2 Port

If you have a second Internet phone service account, then use the PHONE 2 port. It allows you

 

to connect a second telephone (or fax machine) to the Phone Adapter using an RJ-11

 

telephone cable (not included).

NOTE: These Phone ports do not carry any voltage.

ETHERNET Port

The ETHERNET port allows you to connect the Phone Adapter to your router or gateway using

 

a Category 5 (or better) Ethernet network cable.

POWER Port

The POWER port is where you will connect the included power adapter.

Chapter 2: Getting to Know the Phone Adapter

3

Back Panel Ports

Page 7
Image 7
Linksys PAP2-NA manual Getting to Know the Phone Adapter, Back Panel Ports