24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet

VLAN Port

You can configure VLAN behavior for specific interfaces, including the default VLAN identifier (PVID), accepted frame types, ingress filtering and mode.

VLAN identifier (PVID). VLAN ID assigned to untagged frames received on the interface. (Default: 1)

If an interface is not a member of VLAN 1 and you assign its PVID to this VLAN, the interface will automatically be added to VLAN 1 as an untagged member. For all other VLANs, an interface must first be configured as an untagged member before you can assign its PVID to that group.

Accepted frame types. Sets the interface to accept all frame types, including tagged or untagged frames, or only tagged frames. When set to receive all frame types, any received frames that are untagged are assigned to the default VLAN. (Options: All, Tagged; Default: All)

Ingress filtering. Determines how to process frames tagged for VLANs for which the ingress port is not a member. (Default: Disabled)

Ingress filtering only affects tagged frames.

If ingress filtering is disabled and a port receives frames tagged for VLANs for which it is not a member, these frames will be flooded to all other ports (except for those VLANs explicitly forbidden on this port).

If ingress filtering is enabled and a port receives frames tagged for VLANs for which it is not a member, these frames will be discarded.

Ingress filtering does not affect VLAN independent BPDU frames, such as GVRP or STP. However, they do affect VLAN dependent BPDU frames, such as GMRP.

Mode. Indicates VLAN membership mode for an interface. (Default: General)

Trunk – Specifies a port as an end-point for a VLAN trunk. A trunk is a direct link between two switches, so the port transmits tagged frames that identify the source VLAN. Note that frames belonging to the port’s default VLAN (that is, associated with the PVID) are also transmitted as tagged frames.

General – Specifies a hybrid VLAN interface. The port may transmit tagged or untagged frames.

Access – Is the default setting for all ports.

Fill in the required settings for each interface, click Submit.

Chapter 5: Configuring the Switch through the Web Utility

Switch Config

Figure 5-17: Switch Config - VLAN Port

38

Page 46
Image 46
Linksys SRW224P manual Switch Config Vlan Port

SRW224P specifications

The Linksys SRW224P is a versatile and efficient managed switch that caters to the needs of small to medium-sized businesses. This Layer 2 switch stands out with its robust functionality and user-friendly design, making it an ideal choice for networking professionals looking to enhance their network infrastructure.

One of the standout features of the SRW224P is its 24 Gigabit Ethernet ports, which provide high-speed connectivity for various devices across the network. This is particularly beneficial in environments with bandwidth-hungry applications, such as data transfers, video conferencing, and online collaboration tools. Additionally, the switch comes with 2 dual-personality ports that can be used as either Gigabit Ethernet or SFP (Small Form-factor Pluggable) ports, allowing for flexible and scalable network setups.

Power over Ethernet (PoE) capability is another significant aspect of the SRW224P. With a total PoE output of up to 370 watts, the switch can power devices such as IP cameras, VoIP phones, and wireless access points directly through the Ethernet cable, simplifying the installation process and reducing cable clutter. This feature is particularly advantageous for organizations seeking to deploy network devices in areas where power outlets are limited.

The SRW224P also boasts advanced management features, including VLAN support for segmenting network traffic, Quality of Service (QoS) for prioritizing critical applications, and Spanning Tree Protocol (STP) for redundant network paths. These capabilities enhance network performance and reliability, ensuring that users experience minimal downtime and efficient data flow.

Security is a top priority with the SRW224P, which includes features such as port security, access control lists (ACLs), and DHCP snooping. These measures help protect the network from unauthorized access and potential attacks, safeguarding sensitive information and maintaining operational integrity.

In terms of user interface, the Linksys SRW224P is equipped with a web-based management interface that allows for easy configuration and monitoring. This intuitive interface enables IT administrators to manage the switch remotely, providing real-time insights into network performance and facilitating troubleshooting.

Overall, the Linksys SRW224P managed switch combines high performance, advanced features, and security measures that make it a reliable choice for businesses aiming to optimize their network infrastructure. Its PoE capabilities, extensive port options, and management features ensure that it meets the demands of modern networking environments, making it a valuable asset for any organization.