INDUSTRY CANADA (CANADA)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations.

EC DECLARATION OF CONFORMITY (EUROPE)

Linksys Group declares that the Instant Wireless™ Series products included in the Instant Wireless™ Series conform to the specifications listed below, following the provisions of the EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC:

ETS 300-826, 301 489-1 General EMC requirements for Radio equipment. EN 609 50 Safety

ETS 300-328-2 Technical requirements for Radio equipment.

Note: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. For more details, contact Linksys Corporate Compliance.

Note: Combinations of power levels and antennas resulting in a radiated power level of above 100 mW are considered as not compliant with the above mentioned directive and are not allowed for use within the European community and countries that have adopted the European R&TTE directive 1999/5/EC and/or the CEPT recommendation Rec 70.03. For more details on legal combinations of power levels and antennas, contact Linksys Corporate Compliance.

Linksys Group™ vakuuttaa täten että Instant Wireless IEEE 802.11 PC Card tyyppinen laite on direktiivin 1999/5/EY, direktiivin 89/336/EEC ja direktiivin 73/23/EEC oleellisten vaatimusten ja sitä koskevien näiden direktiivien muiden ehtojen mukainen.

Linksys Group™ déclare que la carte PC Instant Wireless IEEE 802.11 est conforme aux con- ditions essentielles et aux dispositions relatives à la directive 1999/5/EC, la directive 89/336/EEC, et à la directive 73/23/EEC.

Belgique B L’utilisation en extérieur est autorisé sur le canal 11 (2462 MHz), 12 (2467 MHz), et 13 (2472 MHz).

Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, au-dessus d’un espace public, aucun enregistrement n’est nécessaire pour une distance de moins de 300m. Pour une dis- tance supérieure à 300m un enregistrement auprès de l’IBPT est requise. Pour une utilisation publique à l’extérieur de bâtiments, une licence de l’IBPT est requise. Pour les enregistrements et licences, veuillez contacter l’IBPT.

France F: Bande de fréquence restreinte: seuls les canaux 10, 11, 12, 13 (2457, 2462, 2467, et 2472 MHz respectivement) doivent être utilisés en France.

Toute utilisation, qu'elle soit intérieure ou extérieure, est soumise à autorisation. Vous pouvez contacter l'Autorité de Régulation des Télécommuniations (<http://www.art-telecom.fr>) pour la procédure à suivre.

France F: Restricted frequency band: only channels 10, 11, 12, 13 (2457, 2462, 2467, and 2472 MHz respectively) may be used in France. License required for every indoor and outdoor installations. Please contact ART for procedure to follow.

Deutschland D: Anmeldung im Outdoor-Bereich notwending, aber nicht genehmi- gungspflichtig. Bitte mit Händler die Vorgehensweise abstimmen.

Germany D: License required for outdoor installations. Check with reseller for procedure to fol- low

Italia I: E' necessaria la concessione ministeriale anche per l'uso interno. Verificare con i riven- ditori la procedura da seguire. L'uso per installazione in esterni non e' permessa.

Italy I: License required for indoor use. Use with outdoor installations not allowed.

the Netherlands NL License required for outdoor installations. Check with reseller for proce- dure to follow.

Nederlands NL Licentie verplicht voor gebruik met buitenantennes. Neem contact op met verkoper voor juiste procedure

Wireless Network Access Point

Table of Contents

Chapter 1: Introduction

1

The Instant WirelessTM Network Access Point

1

Features

1

Package Contents

2

System Requirements

2

Chapter 2: Planning Your Wireless Network

3

Network Topology

3

Roaming

3

Chapter 3: Getting to Know the Wireless Network Access Point

4

The Wireless Network Access Point’s Ports

4

The Wireless Network Access Point’s LEDs

5

Chapter 4: Connecting the Wireless Network Access Point

6

Chapter 5: Setting Up the Wireless Network Access Point

7

Chapter 6: Configuring the Wireless Network Access Point

14

The Setup Tab

14

The Password Tab

19

The Status Tab

20

The Help Tab

22

The Filter Tab

23

The Wireless Tab

25

Appendix A: Troubleshooting

28

Frequently Asked Questions

28

Appendix B: Setting Up the TCP/IP Protocol

32

Setting Up TCP/IP in Windows

32

TCP/IP Setup for Windows 95, 98, and Millennium

33

TCP/IP Setup for Windows NT 4.0

34

TCP/IP Setup for Windows 2000

35

Appendix C: Glossary

36

Page 3
Image 3
Linksys WAP11 v2.2 manual Table of Contents

WAP11 v2.2 specifications

The Linksys WAP11 v2.2 is a wireless access point designed for small to medium-sized business and home users looking to expand their network capabilities. This device offers an appealing blend of features and technologies that cater to both ease of use and efficiency.

One of the primary features of the WAP11 v2.2 is its compatibility with the IEEE 802.11b wireless networking standard. Operating in the 2.4 GHz frequency band, this access point can deliver data rates of up to 11 Mbps under optimal conditions. This makes it well-suited for basic internet browsing, file sharing, and other low to moderate bandwidth applications.

A standout characteristic of the WAP11 v2.2 is its versatility in deployment. It can be easily configured to function in multiple modes, including access point, wireless bridging, or as a wireless repeater. This flexibility allows users to tailor the device to their specific networking needs, whether they are expanding an existing wireless network or creating a new one altogether.

The WAP11 v2.2 also includes robust security features to protect network data. It supports WEP (Wired Equivalent Privacy) encryption, which, while now considered less secure than modern protocols, was widely used during its time to provide a basic level of wireless security. Additionally, the access point offers MAC address filtering, allowing network administrators to whitelist or blacklist specific devices from accessing the network.

Installation and configuration of the WAP11 v2.2 is facilitated by a user-friendly web interface, making it accessible to users of all technical skill levels. The device can be set up quickly through a standard web browser, allowing users to easily manage settings like SSID, security options, and IP addressing.

In terms of physical characteristics, the WAP11 v2.2 features a compact design that allows for flexible placement in various environments. It includes a reset button for easy troubleshooting and recovery from erroneous settings, ensuring minimal downtime.

Overall, the Linksys WAP11 v2.2 is a solid choice for users looking to enhance their wireless network. Its combination of multiple operating modes, basic security features, and ease of use makes it a practical option for home offices or small business applications. Despite being an older model, it laid the groundwork for future advancements in wireless networking, reflecting the evolution of connectivity solutions over time.