![](/images/new-backgrounds/1264419/26441917x1.webp)
Chapter 3
Setup Wizard Advanced Options
•High Security (WPA/WPA2) If your network uses WPA/WPA2 security, enter the passphrase in the Passphrase field and click Next.
WPA/WPA2 Passphrase
Passphrase Enter the network passphrase, this can used any numbers or characters and must be between 8 and 63 characters in length.
•Better Compatibility with Legacy Devices (WEP) If your network uses WEP security, enter the necessary information in the appropriate fields and click Next.
WEP Settings
WEP Select a level of WEP encryption, 64 bits (10 hex digits) or 128 bits (26 hex digits).
Passphrase The passphrase is
WEP Key Enter the WEP key used to access the network. This is defined on the access point or router that you are connecting to.
TX Key Select the transmit key used to access the network. The default value is 1.
Authentication Selecttheappropriateauthentication method used to access the network. The default setting is Auto.
NOTE: WEP is not supported by Draft 11N specifications. If your network uses WEP, the Adapter will only operate in 802.11B/G modes.
14.The Network Settings screen will appear. Verify the network settings and click Next to continue or Back to modify the settings.
Network Settings
15. The Link Status screen will appear, click Next.
Link Status