4
Chapter 2: Getting to Know the Wireless Music Bridge
The Back Panel
Wireless-G Music Bridge
Chapter 2: Getting to Know the Wireless Music Bridge

The Back Panel

The Bridge's ports, where all cables are connected, are located on the back panel.
Audio Out L/R The Audio Out (Left and Right) ports connect to the Audio In (Left and Right) ports of your
audio receiver.
Line Out The Line Out port is where you can connect headphones or portable audio speakers with a
headphone jack.
Coaxial Out The Coaxial Out (Digital Audio) port is where you connect the cable coming from your audio
receiver.
Optical Out The Optical Out (Digital Audio) port is where you connect the cable from the Optical In port of
your audio receiver.
Ethernet This Ethernet port connects to Ethernet network devices, such as a switch or router, if using a
wired connection.
Reset Button There are two ways to Reset the Bridge's factory defaults. Either press the Reset Button, for
approximately ten seconds, or restore the defaults from the Password tab in the Bridge's Web-
Based Utility.
Power The Power port is where you will connect the power adapter.
Important: Resetting the Music Bridge will
erase all of your settings and replace them
with the factory defaults. Do not reset the
Bridge if you want to retain these settings.
Figure 2-1: Back Panel