Appendix C
Windows XP Wireless Zero Configuration
Appendix C: Windows
XP Wireless Zero
Configuration
Windows XP Wireless Zero Configuration
If your computer is running Windows XP, then this choice will be available. If you want to use Windows XP Wireless Zero Configuration to control the Adapter, instead of using the Wireless Network Monitor, then
NOTE: If you have WPA2 Wireless Security, refer to Update for Windows XP (KB893357) on the microsoft.com website to be able to connect correctly.
Wireless Network Monitor
Use Windows XP Configuration
If you want to switch back to the Wireless Network Monitor,
Use Linksys Wireless Network Monitor
NOTE: For more information on Windows XP Wireless Zero Configuration, refer to Windows Help.
1.After installing the Adapter, the Windows XP Wireless Zero Configuration icon appears in your computer’s system tray.
Windows XP Wireless Zero Configuration Icon
2.The screen that appears will show any available wireless network. Select the network you want. Click Connect.
If your network does not have wireless security enabled, go to step 3.
If your network does have wireless security enabled, go to step 4.
NOTE: Steps 2 and 3 are for Windows XP with Service Pack 2 installed.
Available Wireless Network
3.If your network does not have wireless security enabled, click Connect Anyway to connect the Adapter to your network.
No Wireless Security
4.If your network uses wireless security WEP, enter the WEP Key used into the Network Key and Confirm network key fields. If your network uses wireless security WPA Personal, enter the Passphrase used into the Network Key and Confirm network key fields. Click Connect.
RangePlus Wireless Notebook Adapter | 26 |
