Wireless-N Notebook Adapter

the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If you have any non-Linksys wireless products, enter the WEP key manually on those products.)

WEP Key - The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption, enter exactly 10 hexadecimal characters. For 128-bit encryption, enter exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.

Then click Connect and proceed to Step 3.

PSK

If your network has the wireless security PSK enabled, this screen will appear.

Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu.

Pre-shared Key - Enter a Pre-shared Key of 8-63 characters in the Pre-shared Key field. Then click Connect and proceed to Step 3.

PSK2

If your network has the wireless security PSK2 enabled, this screen will appear. Pre-shared Key - Enter a Pre-shared Key of 8-63 characters in the Pre-shared Key field. Then click Connect and proceed to Step 3.

3.After the software has been successfully installed, the Congratulations screen will appear. Click Finish to return to the Link Information screen.

Congratulations! The profile has been successfully configured.

Chapter 5: Using the Wireless Network Monitor

Figure 5-12: PSK Needed for Connection

Figure 5-13: PSK2 Needed for Connection

Figure 5-14: Congratulations

23

Create a New Profile

Page 29
Image 29
Linksys WPC300N manual PSK Needed for Connection