Linksys WPG11 manual Instant WirelessTM Series, Using the Player, Wireless Presentation Gateway

Instant WirelessTM Series

The Player will now install. When you see the final installation screen, like that shown in Figure 4-4, click the Finish button.

Figure 4-4

Using the Player

To use the Player, simply double-click the Linksys desktop icon (like that shown in Figure 4-5) or select the program from the Program Folder. This will bring up the Wireless Presentation Gateway Player screen, as shown in Figure 4- 6.

Figure 4-5

On the Player’s Welcome screen, you will be given the option of using the Wireless Presentation Gateway in High-Speed Mode. This mode will allow faster transfer of data to your projector or monitor, but will isolate your wire- less PC and not allow access to your network or the Internet while the PC is uti- lizing the Wireless Presentation Gateway. For more information on High-Speed Mode, see Appendix C: Using the Wireless Presentation Gateway in High- Speed Mode.

Click the radio button beside High-Speed Mode if you choose to use this mode. Then, click the Next button to continue.

Wireless Presentation Gateway

Figure 4-6

The following screen, shown in Figure 4-7, will allow you to select which Wireless Presentation Gateway you will be using. If no Wireless Presentation Gateway is found, a screen will appear with instructions on how to manually detect the Wireless Presentation Gateway. Once you’ve selected the Wireless Presentation Gateway from the drop-down menu, click the Next button to con- tinue.

Figure 4-7

8 9