Wireless-G Broadband Router with SpeedBooster

Hardware Installation for Connection of One Router to Another

Some applications, such as Parental Control, apply setting to all PCs connected to the Router. Sometimes, you may not want those settings to apply to all settings in your network. When this is the case, you may want to connect the Router behind another, so you can have some PCs connected to the Router with Parental Control and some connected to a Router without.

Before you connect one Router to another, you must make sure that both have different IP Addresses. This is mandatory because both routers may be set to the same IP address by default, right out of the box. If both routers have the same IP address, then you may not be able to set up the Router with Parental Control.

Internet

Broadband

Router

Wireless-G

 

Modem

 

Broadband

 

 

 

Router

Figure 4-4: Connecting the Router Behind Another

First, make sure the Router is NOT connected to your network. Then follow these instructions:

1.To access the other router’s Web-based Utility, launch your web browser, and enter the other router’s default IP address, 192.168.1.1, or whatever IP Address you have set it to, in the Address field. Then, press Enter.

2.A password request page will appear. Leave the User Name field blank. In the Password field, enter the password you have set (the default password is admin). Then click the OK button.

3.The first screen that appears will display the Setup tab. In the Network Setup section, there is a setting called Local IP Address, which is set to 192.168.1.1. Change this to 192.168.2.1.

4.Click the Save Settings button to save your change, and then exit the Web-based Utility.

5.Power down your network devices. Now you will begin the hardware installation of Broadband Router.

6.Locate an optimum location for the Broadband Router. The best place for the Broadband Router is usually at the center of your wireless network, with line of sight to all of your mobile stations.

7.Fix the direction of the antennas. Try to place the Router in a position that will best cover your wireless network. Normally, the higher you place the antenna, the better the performance will be.

Chapter 4: Connecting the Wireless-G Broadband Router

NOTE: Steps 1-4 are instructions for a typical Linksys router; however, if you are using a non- Linksys router, refer to the other router’s documentation for instructions on how to change its local IP address to 192.168.2.1.

Broadband

Internet Modem

Router

Wireless-G

Broadband

Router

Multiple PCs

Figure 4-5: Diagram for Connection to Another Router

10

Hardware Installation for Connection of One Router to Another

Page 16 Page 18
Page 17
Image 17
Linksys WRT54GS manual Diagram for Connection to Another Router
Page 16 Page 18

WRT54GS specifications

The Linksys WRT54GS is a well-regarded wireless router that has earned its place in the annals of networking history due to its robust features and stellar performance. Initially released in the early 2000s, this model has become a favorite among both home and small business users, thanks to its reliability and ease of use.

One of the standout features of the WRT54GS is its support for the 802.11g wireless standard, which allows for data transfer rates up to 54 Mbps. This speed is sufficient for most everyday tasks such as browsing the web, streaming music, and even watching videos, making it a versatile choice for households with multiple devices. The router also includes backward compatibility with the older 802.11b standard, ensuring that users with older devices can still connect without issue.

The WRT54GS is equipped with a 4-port Ethernet switch, allowing for wired connections to additional devices. This is particularly advantageous for users who require stable, high-speed connections for gaming consoles or desktop computers. The Ethernet ports operate at speeds of up to 100 Mbps, further enhancing the overall network performance.

Security is a critical aspect of any networking device, and the WRT54GS does not disappoint. It supports various encryption protocols, including WEP, WPA, and WPA2, offering multiple layers of security to protect user data. The router also features a built-in firewall, which adds an additional layer of defense against external threats.

Another key characteristic of the WRT54GS is its user-friendly web-based interface, which simplifies the process of setting up and managing the network. Users can easily configure settings, set up parental controls, and manage connected devices without requiring advanced technical skills.

Additionally, the WRT54GS is renowned for its open-source firmware compatibility, enabling tech-savvy users to enhance its functionality with custom firmware options like DD-WRT or Tomato. These alternatives can unlock additional features such as improved bandwidth management, advanced VPN support, and enhanced wireless performance.

In summary, the Linksys WRT54GS is a reliable and versatile router with features that cater to a wide range of users. Its combination of robust wireless performance, extensive security options, and user-friendly configuration makes it an ideal choice for many. While more advanced options are available today, the WRT54GS remains a classic model that paved the way for future networking devices.
Top Page Image Contents