Wireless-G Broadband Router with SpeedBooster

Optional Settings

Some of these settings may be required by your ISP. Verify with your ISP before making any changes.

Router Name. In this field, you can type a name of up to 39 characters to represent the Router.

Host Name/Domain Name. These fields allow you to supply a host and domain name for the Router. Some ISPs, usually cable ISPs, require these names as identification. You may have to check with your ISP to see if your broadband Internet service has been configured with a host and domain name. In most cases, leaving these fields blank will work.

MTU. MTU is the Maximum Transmission Unit. It specifies the largest packet size permitted for Internet transmission. You should leave this value in the 1200 to 1500 range. To have the Router select the best MTU for your Internet connection, select Auto. The default setting is Auto.

Network Setup

The Network Setup section changes the settings on the network connected to the Router’s Ethernet ports. Wireless Setup is performed through the Wireless tab.

Router IP

This presents both the Router’s IP Address and Subnet Mask as seen by your network.

Network Address Server Settings (DHCP)

The settings allow you to configure the Router’s Dynamic Host Configuration Protocol (DHCP) server function. The Router can be used as a DHCP server for your network. A DHCP server automatically assigns an IP address to each computer on your network. If you choose to enable the Router’s DHCP server option, you must configure all of your network PCs to connect to a DHCP server (the Router), and make sure there is no other DHCP server on your network.

DHCP Server. DHCP is enabled by factory default. If you already have a DHCP server on your network, or you don’t want a DHCP server, then click the Disable radio button (no other DHCP features will be available).

Starting IP Address. Enter a value for the DHCP server to start with when issuing IP addresses. Because the Router’s default IP address is 192.168.1.1, the Starting IP Address must be 192.168.1.2 or greater, but smaller than 192.168.1.253. The default Starting IP Address is 192.168.1.100.

Maximum Number of DHCP Users. Enter the maximum number of PCs that you want the DHCP server to assign IP addresses to. This number cannot be greater than 253. The default is 50.

Chapter 5: Configuring the Wireless-G Broadband Router

Figure 5-9: Optional Settings

Figure 5-10: Router IP

Figure 5-11: Network Address Server Settings

17

The Setup Tab - Basic Setup

Page 24
Image 24
Linksys WRT54GS manual Router IP

WRT54GS specifications

The Linksys WRT54GS is a well-regarded wireless router that has earned its place in the annals of networking history due to its robust features and stellar performance. Initially released in the early 2000s, this model has become a favorite among both home and small business users, thanks to its reliability and ease of use.

One of the standout features of the WRT54GS is its support for the 802.11g wireless standard, which allows for data transfer rates up to 54 Mbps. This speed is sufficient for most everyday tasks such as browsing the web, streaming music, and even watching videos, making it a versatile choice for households with multiple devices. The router also includes backward compatibility with the older 802.11b standard, ensuring that users with older devices can still connect without issue.

The WRT54GS is equipped with a 4-port Ethernet switch, allowing for wired connections to additional devices. This is particularly advantageous for users who require stable, high-speed connections for gaming consoles or desktop computers. The Ethernet ports operate at speeds of up to 100 Mbps, further enhancing the overall network performance.

Security is a critical aspect of any networking device, and the WRT54GS does not disappoint. It supports various encryption protocols, including WEP, WPA, and WPA2, offering multiple layers of security to protect user data. The router also features a built-in firewall, which adds an additional layer of defense against external threats.

Another key characteristic of the WRT54GS is its user-friendly web-based interface, which simplifies the process of setting up and managing the network. Users can easily configure settings, set up parental controls, and manage connected devices without requiring advanced technical skills.

Additionally, the WRT54GS is renowned for its open-source firmware compatibility, enabling tech-savvy users to enhance its functionality with custom firmware options like DD-WRT or Tomato. These alternatives can unlock additional features such as improved bandwidth management, advanced VPN support, and enhanced wireless performance.

In summary, the Linksys WRT54GS is a reliable and versatile router with features that cater to a wide range of users. Its combination of robust wireless performance, extensive security options, and user-friendly configuration makes it an ideal choice for many. While more advanced options are available today, the WRT54GS remains a classic model that paved the way for future networking devices.