Linksys WRT54GX4 Administration Tab Diagnostics, Ping Test, Traceroute Test, Ping Parameters

Wireless-G Broadband Router with SRX400

The Administration Tab - Diagnostics

The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components.

Ping Test

Ping Parameters

Ping Target IP or Domain Name, No. of Pings, and Packets Sent. The Ping test will check the status of a connection. To start the test, enter the IP address or domain name of the PC whose connection you wish to test, how many times you wish to test it, and the size of the packet for testing. Then, click the Start Test button. The test field will show if the test was successful. To stop the test, click the Abort Test button. Click the Clear button to clear the field.

Traceroute Test

Traceroute Parameters

IP Address or Domain Name. To test the performance of a connection, enter the IP address or domain name of the PC whose connection you wish to test and click the Start Test button. The test field will show if the test was successful. To stop the test, click the Abort Test button. Click the Clear button to clear the screen.

Chapter 5: Configuring the Wireless-G Broadband Router

Figure 5-37: Administration Tab - Diagnostics

37

The Administration Tab - Diagnostics