Wireless-G Internet Video Camera

Network Type. Select the network’s mode, Infrastructure or Ad-hoc.

Channel No. If the Camera is set to ad-hoc mode, select its channel setting from the drop-down menu.

Security. To use WEP encryption, click the Enable radio button. You will be asked to confirm that you want to enable wireless security for the Camera. Click the OK button. Then click the Edit Security Settings button. For more information, go to the “Security Settings” section. To disable WEP encryption, click the Disable radio button.

To save your changes, click the Apply button. To cancel any unsaved changes, click the Cancel button. To get additional information about the screen’s features, click the Help button.

Security Settings

Configure the Camera’s WEP encryption settings on this screen. Make sure all devices on your wireless network use the same settings.

Default Transmit Key. Select which WEP key (1-4) will be used when your network’s access point or wireless router sends and receives data.

WEP Encryption. Select the level of WEP encryption you wish to use, 64 Bit Keys (10 Hex chars) or 128 Bit Keys (26 Hex chars).

Passphrase. Instead of manually entering WEP keys, you can use a Passphrase to generate them. It is case- sensitive and should not be longer than 16 alphanumeric characters. (This Passphrase is compatible with Linksys wireless products only. If you are also using non-Linksys wireless products, you will need to enter your WEP keys manually on those products.) After entering the Passphrase, click the Generate button to create WEP key(s).

Key 1-4. If you are used a Passphrase, the WEP keys will be displayed after you have generated them. If you are not using a Passphrase, manually enter a set of values in each field. (For 128-bit WEP, only one WEP key is permitted.) If you are using 64-bit WEP encryption, then each key must consist of exactly 10 hexadecimal characters. If you are using 128-bit WEP encryption, then the key must consist of exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” through “9” and “A” through “F”.

Authentication. The default is set to Open System, for which the sender and the recipient do NOT use a WEP key for authentication. You can also choose Shared Key, when the sender and recipient use a WEP key for authentication. This setting should match the one on your network’s access point or wireless router.

To save your changes, click the Apply button. To cancel your changes, click the Cancel button. To get additional information about the screen’s features, click the Help button.

Chapter 9: Using the Wireless-G Internet Video Camera’s Web-based Utility

Figure 9-6: Confirmation Screen

Figure 9-7: WEP Key Settings Screen

52

Setup

Page 59 Page 61
Page 60
Image 60
Linksys WVC54G-UK manual Security Settings
Page 59 Page 61

WVC54G-UK specifications

The Linksys WVC54G-UK is an advanced wireless network camera designed for flexibility and convenience in surveillance applications. It offers a range of features that cater to both home and business users seeking to maintain security through remote monitoring.

At the heart of the WVC54G-UK is its ability to deliver high-quality video streaming. The camera supports a resolution of up to 640x480 pixels, which is adequate for monitoring indoor spaces. Equipped with a 1/4 inch CMOS sensor, it provides decent image quality in varied lighting conditions. The infrared (IR) capability is a vital feature of this camera, enabling it to capture clear images even in low-light environments, making it a compelling choice for nighttime surveillance.

Another major strength of the WVC54G-UK is its wireless connectivity. It adheres to the IEEE 802.11g standards, offering data rates up to 54 Mbps. This facilitates easy installation without the need to run cables throughout your space. Users can set up the camera anywhere within the wireless range of their router, enhancing installation flexibility. Additionally, the camera supports WEP and WPA security protocols, ensuring that the video feed is secure from unauthorized access.

The integrated web server allows for remote access via a standard web browser, giving users the ability to monitor their premises from anywhere with an internet connection. This is particularly useful for business owners who need to keep an eye on operations or parents wishing to ensure the safety of their children at home. Notably, the camera supports multiple video formats, including MJPEG and MPEG, ensuring compatibility with various web streaming technologies.

For users who prefer a more hands-on approach, the WVC54G-UK includes built-in motion detection capabilities. Users can set motion-triggered alerts, allowing the camera to send notifications when unusual movement is detected. This feature not only enhances security but also conserves storage space by only recording significant activity.

The WVC54G-UK is designed for ease of use, with a straightforward setup process thanks to its user-friendly configuration interface. It also supports various operating systems, making it a versatile addition to any existing surveillance system. Overall, the Linksys WVC54G-UK stands out as a reliable choice for anyone looking to bolster their security with a wireless camera solution featuring robust functionality, flexibility, and quality performance.
Top Page Image Contents