5
English Connecting
Back panel European version
IR OUT 1 & 2 Infrared flasher connectors
Allow the control via the handset of auxiliary devices that accept infrared signals.
MAIN RX TX CONNECT LED indicators
Indicate signals being transmitted between units in a CONNECT system.
ACC KNEKT connector
For installing unit in a KNEKT system.
ROOM 1 - 4,MAIN IN CONNECT connectors
For linking units in a CONNECT system (see CONNECT Featurechapter).
ROOM RX TX CONNECT LED indicators
Indicate signals being transmitted between units in a CONNECT system.
GND,AM
AM aerial connectors.
FM AERIAL
FM aerial connector.
MONITOR OUT S-video output
For connection to a TV that accepts an S-video signal.
S VIDEO IN
For connection from a VCR with an S-video output.
TV SCART
For connection to the SCART socket on a TV.
VOLTAGE SELECTOR
11
10
9
8
7
6
5
4
3
2
1MAINS INPUT
Speaker output connectors
Amplified output for direct connection to speakers.
PRE OUT Line output connectors
Connections for power amplifier,and subwoofer output.
TAPE OUT
For connection to a tape recorder.
AUX IN 1 & 2
Analogue inputs for auxiliary sources.
DIGITAL OUT
For connection to a device with digital input capabilities.
DIGITAL IN 1 & 2
Digital optical inputs for auxiliary sources.
VCR SCART
For connection from the SCART socket on a VCR.
The CLASSIK Movie Di should be powered down then disconnected from the
mains supply before connecting or disconnecting any of the plugs on the back
panel.If this is not done you may generate surges which could damage the
CLASSIK Movie Di or other components in your AV system.
18
17
16
15
14
13
12
19