Tuner
36
English
Signal mute level
The mute level function allows you to mute the output from the tuner if the strength of
a signal is below a set level.
EXAMPLE:
If you set the mute level at 25,then the tuner will mute any received frequency that is
below 25.
To display the mute level and signal strength:
using the handset -
●Press SIGNAL.
MUTE LEVEL and its value appear on the front panel display,followed by the mute level
display bar.
The current signal strength appears on the far right of the display.Signal strength
ranges from 0 (no signal) to 50 (strongest signal).The figure may fluctuate,reflecting the
varying strength of the signal being received.
To adjust the signal mute level:
using the handset -
●After pressing SIGNAL,to increase/decrease the signal mute level, repeatedly
press or hold / .
Two minutes after the signal mute level has been adjusted,the display reverts to its
previous display.
NOTE:
Signal mute level is factory-set at 15.
SIGNAL