Tuner
34
English

Tuner

This chapter describes how to operate the CLASSIK Movie Di’s tuner and explains various
features and user functions.

Setup

The first time the tuner is selected the display shown below appears on the front panel.
The CLASSIK Movie Di must be set for the correct radio frequency range for
your country.Use the / keys on the handset to select your region (either Europe,
USA or Japan) then press ‘enter’on the handset.If you are unsure of the correct
setting contact your local Linn retailer.

First of all

1. Press on the CLASSIK Movie Di’s front panel.
Enter TUNER mode:
2. Press TUNERon the handset. The tuner display appears on the front panel.
or
Repeatedly press or hold SOURCE + / SOURCE -on the front panel until the display
shows LISTEN TUNER.After a few seconds the display will change to the tuner display
above.

Tuning functions

Ensure the CLASSIK Movie Di is in TUNER mode (see First of allon this page).
AM and FM band selection
To toggle between AM and FM:
Press BANDon the handset or TITLE/BAND on the front panel.
The selected band is shown on the front panel display.
Frequency selection
To increase or decrease the received frequency:
using the handset -
Press TUNE.
TUNE is shown on the front panel display.
To increase or decrease the frequency,repeatedly press or hold / .
or
Enter a frequency using the digit keys.As you enter a frequency it is automatically
adjusted to ensure it is valid.To remove an incorrect digit,press .
SCAN
Region?
SELECT REGION:
FM