13
English

Video Output / Setup Menus

Video Output
The output video signal that is correct for your TV can be selected using the FORMAT
key on the front panel.
To do this:
●Repeatedly press or hold SOURCE +/SOURCE– on the front panel until the
display shows LISTEN DISC / RECORD OFF.
●Repeatedly press FORMATto select the required format (either PAL,NTSC or
MULTI if your TV accepts both PAL and NTSC).
●With the required format showing on the front panel display,press and hold
FORMATuntil the display changes to show one of the video signal types (either S
VIDEO,COMPOSITE,YPrPb, or RGB*).
●Repeatedly press FORMATuntil the required video signal type is shown on the
display.
●Wait a few seconds for the display to change to the LISTEN DISC / RECORD OFF
display.
*RGB is not available on the US version of the CLASSIK Movie System Di.