SNEAKY MUSIC DS
OWNER’S MANUAL
INSTALLATION
Unpacking
The Sneaky Music DS is supplied with the following:
•2 x red, 2 x black BAF loudspeaker connectors
•mains lead
•4 rubber feet
•
We recommend that you retain all packaging in case you need to transport the Sneaky Music DS at a later date.
Cleaning
Disconnect the Sneaky Music DS from the power supply before cleaning. Remove dust and fingerprints with a soft, dry cloth.
Connecting to the mains supply
The Sneaky Music DS contains an automatic internal mains voltage switch. This switch operates on all worldwide mains voltages from 100 V to 240 V. The unit can be connected to any worldwide mains voltage with no adjustment.
This unit must be earthed. Use the earthed moulded mains lead supplied, or if no mains earth is available, ensure the product’s EARTH GROUND connector is connected to an earthing terminal.
Positioning
You can position the Sneaky Music DS almost anywhere you find convenient, but please consider the following points:
•The unit should be placed on a flat, stable and rigid surface.
•Allow at least 4" (10 cm) free space above and at each side of the unit for air circulation.
•Do not position the unit where sunlight can shine (whether directly, diffused or reflected) on its front surface as the
•For best performance do not stack the unit with other products. Ideally, position the unit on a shelf by itself or, if proximity to other products is unavoidable, positioning
•The unit should not be situated above, or directly adjacent to, sources of heat such as radiators, other power amplifiers, etc. Nor should it be enclosed in a cabinet with such devices.
Amplifier protection
The Sneaky Music DS features two methods of protecting its internal power amplifier from damage.
Short-circuit protection
If the speaker outputs are accidently
Over-temperature protection
If the power amplifier’s temperature rises above its safe operating limit, it will cease operation until the temperature drops to a safe level and will then automatically resume.
www.linn.co.uk
2