POSITIONING

KABER speakers have been designed to perform best when placed close to a wall. Ideally the rear of the loudspeaker should between 4" and 12" (10 cm and 30 cm) from the wall, and at least 18" (45 cm) from any corner.

The distance between the loudspeaker and your normal listening position should form part of an equilateral triangle. They also benefit from being angled inwards slightly by between 5 and 10 degrees.

These are general guidelines and a little experimentation with position and angle can optimise results for a particular listening room.

CAUTION The spikes are sharp and you should take care when moving the speakers.

Once you have determined the final position of your KABERS, check for any rocking movement, adjusting the appropriate spike/s until complete stability is achieved. Tighten all locknuts, taking care not to alter the positioning of the spikes.

MAINTENANCE

The Linn KABERs normally need no maintenance, other than occasionally polishing the cabinet with a soft, slightly damp cloth. Take care not to touch the drive units behind the grille cloth. If you have to transport your speakers, remove the spikes and use the original packing. Your retailer can provide packing if necessary.

12

Page 14
Image 14
Linn LS500 owner manual Positioning, Maintenance