Panasonic KX-PS8000 manual System Setting, Network, Maintenance, Basic Operations, Supplies

Basic Operations

■Reset Calibration

Setting YES resets the current settings back to the default settings.

Note:

BThe color density setting affects the average life of toner.

System Setting

Configures the printer.

■Energy Star

To conserve energy and operating cost, this printer is provided with a programmable power save feature. Printer is factory set with the power save feature turned on.

If Energy Star is enabled, the printer enters the Energy Star mode when the printer is idle for 30 minutes.

■Auto Continue

With the Auto Continue set to ON, the printer automatically recovers from the following error conditions if no recovery operation is done for 10 seconds.

BMemory Overflow

BSCSI communication error

■Data Timeout

With the Data Timeout set to ON, the printer automatically returns to Ready status if the printer does not receive any data from a computer within the time period set in this selection (30 to 240 seconds).

Network

Sets the addresses used in TCP / IP Protocol. During setting, use the I/CANCEL button to move the cursor and the F/CONTINUE button to increase the numerical value.

Maintenance

Displays the page count of the printer and the consumption of supplies. It also gives you an idea when the following supplies need to be replaced. The following table shows the average life of each supply, which is based on a 5% image area and standard density. Refer to pages 98 and 99 for details.

Supplies	Average life
Imaging Unit *	60,000 images
Transfer Unit	80,000 pages
Fuser Unit *	31,000 pages
Oil Supply Roll *	15,500 pages

*When a supply is replaced with a new one, the printer will automatically reset the page counter for that supply to 0.

90