Panasonic KX-PS8000 manual For Your Safety, General, Power Source, Laser Safety, Ozone Release

For Your Safety

General

Warning

BTo prevent fire or shock hazard, do not expose this product to rain or any type of moisture.

Caution

BDo not open covers and do not attempt to repair the unit yourself. Refer servicing to qualified personnel.

BAvoid contact with the rotating rollers when the ADF top cover is open.

Power Source

Warning

BThe power source voltage of this unit is listed on the nameplate. Only plug the unit into an outlet with the proper voltage.

BWhen you operate this equipment, the outlet should be near the equipment and accessible. BTo ensure safe operation the AC cord supplied must be inserted into standard three-prong AC

outlet which is effectively grounded (earthed) through the normal wiring.

BThe fact that the equipment operates satisfactorily does not imply that the power point is grounded (earthed) and that the installation is completely safe. For your safety, if in any doubt about the effective grounding (earthing) of the power point, consult a qualified electrician.

BIf the plug cannot be inserted into the AC outlet, contact a licensed electrician to replace the outlet with a properly grounded (earthed) one. Do not defeat the purpose of the grounding (earthing) plug (ex. do not use a conversion plug).

Laser Safety

Caution

BThe printer utilizes a laser.

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Ozone Release

Warning

BMake sure that the printer is installed in a well ventilated room so as not to increase density of ozone in the air. Since ozone is heavier than air, it is recommended that air at floor level be ventilated.

8