Panasonic KX-PS8000 Problems with image size and position, Care and Maintenance, Media problems

	Care and Maintenance
■Media problems
Trouble	Corrective Action
Frequent paper-	Fan the paper or transparencies before installing them in
picking errors.	their respective trays; this is especially important for
	transparencies because they tend to stick together.
	Make sure that you have loaded paper in the paper tray
	and transparencies in the transparency tray.
	Make sure that the media is installed under the hooks at
	the front of the media tray.
	If printing on transparencies and your printer has a 2nd
	Cassette Feeder, make sure that the transparency tray is
	installed in the upper or middle tray slot.
	Clean the paper-pick rollers ( ☞ P. 94 for instructions).
Frequent media jams.	Make sure that you use a high-quality laser paper:
	60-105 g/m2 (16-28 lbs.) paper in the media trays and
	75-165 g/m2 (20-44 lbs.) paper in the multi-purpose tray.
	If you are using media that is 105 g/m2 (28 lbs.), check if
	the Face Down media output setting is selected in the
	driver. If it is, change the setting to Face Up.
	Use only recommended transparencies ( ☞ P. 152).
	We cannot guarantee the results of other transparencies
	in KX-PS8000 printers.
	Make sure that the media is installed under the hooks at
	the front of the media tray.
	Do not overfill the media tray, as indicated by the red line
	on the right side of the tray.
	Clean the paper-pick rollers ( ☞ P. 94 for instructions).
	Make sure that the media thickness switch is set
	correctly for the installed media ( ☞ P. 38).

■Problems with image size and position

Trouble	Corrective Action
Off-set images.	Check your application for correct image sizing.
Cut-off images.	Check your application for image sizing.
	Make sure that the correct size media is in the media
	tray.

123