Panasonic KX-PS8000 manual Placing Documents, Using the ADF, Using the scanner glass

Basic Operations

Placing Documents

Perform the following and go to page 77 or 80 depending upon the operation.

■Using the ADF

#Fan the stack of documents and tap it on a level surface to avoid document jams.

$Insert the documents fully in the ADF tray with the printed sides facing up and top of the documents first.

The height of document should not exceed the limit mark on the document guide, or it may cause a jam.

%Adjust the document guides to the width of the documents.

%

$

%

■Using the scanner glass

#Open the ADF.

$Place the document face down on the scanner glass referring to the document position marks.

%Close the ADF.

#

%

$

Notes:

BWhen scanning a book type document of more than 2 cm (0.79″) thickness, scan it with the ADF open.

BScanning a document using the flatbed (scanner glass) produces better quality than scanning it using the ADF. For best scanning quality use flatbed scanning.

BIf you scan poorly fixed originals such as catalogs using ADF, they may be partially stained. To prevent the originals from getting stained, use the flat bed scanning.

76