T W E A K F E A T U R E S
Ecoustic amplifiers offer hidden features to further adjust the parameters of the digital effects. In addition to the adjustments described in the EFX Adjust section of this manual‚ additional tweaks may be made to customize effects to user preferences. Tweaks are made by pressing and holding the EFX ADJUST (10 & 23) control while simultaneously rotating the REV/DLY (9 & 22)control.
Note: The EFX Adjust control must be pressed for at least one second to enter Tweak Mode. Reverb settings will not be affected while in Tweak Mode.
The surrounding LED ring will now reflect the value of the effect being tweaked. As in standard parameter changes‚ the effect being tweaked will be the active effect as indicated by the LED adjacent to the effect name.
Tweak Adjustment Parameters
| Doubler | Delay Time |
|
| Phaser | Depth |
|
| Chorus | Wet/Dry Mix |
|
|
|
|
|
| Rotary Speaker | Wet/Dry Mix |
|
|
|
|
|
Creating and Storing a Custom Preset
The following steps explain the creation and storage of two different effects/settings as well as two different settings for REV/DLY. The Doubler and Chorus effects were selected at random. These steps will accomplish custom presets using any of the available effects.
1.Assure the footswitch is in the EFX Select Mode by pressing the Mode Select switch (44) if necessary. The Mode LED (45) will illuminate.
2.Use Preset 1 (46) to select Mute or
3.Select the position of Preset 2 (48). The Modulation LED (49) may be illuminated or dark at the discretion of the user.
4.Select Doubler and adjust the amount to preference using the EFX Adjust (10 & 23) control on the front panel of the Ecoustic (standard adjustment).
5.Press and hold the EFX Adjust (10 & 23) control while adjusting the Doubler delay time to preference with the RVB/DLY (9 & 22) control on the front panel (Tweak mode).
6.Press Preset 2 (48) to change to the other Modulation position. The Modulation LED (49) will illuminate or go dark depending on its status in step 5.
7.Select Chorus and adjust rate to preference using the EFX Adjust 10 & 23) control on the front panel (standard adjustment).
8.Press and hold the EFX Adjust (10 & 23) control while adjusting the Chorus wet/dry mix to preference with the RVB/DLY (9 & 22) control on the front panel (Tweak mode).
9.Select the position of Preset 3 (50). The REV/DLY LED (51) may be illuminated or dark at the discretion of the user.
10.Adjust Reverb/Delay to preference using the REV/DLY (9 & 22) control on the front panel.
11.Press Preset 3 (50) to change to the other REV/DLY position. The REV/DLY LED (51) will illuminate or go dark depending on status in step 10.
12.Adjust Reverb/Delay to preference using the REV/DLY (9 & 22) control.
13.Set the position of Preset 1 (46)‚ Preset 2 (48) and Preset 3 (50) to the settings preferred as defaults. (Default setting is the one that is active when the preset is selected.)
14.Press the Mode Select (44) switch to return to the Preset Mode.
15.
11
