Ecoustic 110
SPECIFICATIONS
Power Amplifier Section
Rated Power:
(Measured @ 1 kHz‚ 120 VAC) 30 W RMS into 8 ohm woofer 10 W RMS into 8 ohm tweeter
Hum & Noise:
(Master volume @ 10‚ tweeter @ 5; 22 Hz to 22 kHz unweighted)
Greater than 100 dB woofer below rated power
Greater than 85 dB tweeter below rated power
Distortion:
(Measured: THD 10 Hz to 300 kHz; Power @ 25 W RMS and 8 W RMS
Woofer: 0.2% THD @ 200 Hz
Tweeter: 0.5% THD @ 10 kHz
System: 20 Hz to 20 kHz; typical less than 0.5%
Power Consumption:
Domestic: 75 W @ 60 Hz; 120 VAC
Export: 75 W @ 50/60 Hz; 230 VAC
Power Amp Input:
Impedance:
Input Level: 0 dBV; 1 V RMS
Pre Amp Section:
All EQ sliders set @ 0
All Effects Off
Nominal volume levels set @ 5
Minimum volume levels set @ 10
System Hum & Noise:
(Both volumes @ 5; 22 Hz to 22 kHz unweighted)
75 dB below rated power
Instrument Input:
Impedance: High Z; 2.2 M ohm
Nominal Input Level:
Minimum Input Level:
Maximum Input Level: 0 dBV‚ 1 V
Microphone Input:
(Low Z; electronically balanced) Impedance: Low Z; 10 k ohm
Nominal Input Level:
Minimum Input Level:
Maximum Input Level:
Auxiliary Input:
(High Z‚ unbalanced) Impedance: High Z‚ 100 k ohms
Nominal Input Level:
Minimum Input Level:
RMS
Maximum Input Level: 0 dBV‚ 1 V RMS
Equalization:
Special active
Preamp Output:
Load Impedance: 1 k or greater
Output Level: 0 dBV‚ 1 V RMS
Effects:
Instrument Channel: doubler‚ phaser‚ chorus‚ rotary speaker‚ reverb and delay Microphone Channel: chorus‚ reverb and delay
Speakers:
10" coaxial‚ 3⁄4"
Dimension:
17.00width x 18.00 height x 12.50 depth (43.2 cm width x 45.7 cm height x 31.8 cm depth)
Weight:
37.5 lbs. (17 kg)
49