Peavey Ecoustic 110 Mode Select 44 and Mode LED, Preset Select Mode, Preset 1, Preset 2, Preset 3

P F C 3 F O O T S W I T C H

The optional Ecoustic PFC 3 footswitch offers tremendous‚ hands-free control over the effects built into the Ecoustic 112 & 110. A perfect addition for the those critical performances!

Mode Select (44) and Mode LED (45)

The PFC 3 footswitch (optional) operates in two modes: EFX Select mode and Preset Select mode. Pressing the Mode Switch (44) selects between the two modes. The active mode is indicated by the Mode LED (45). Illumination of the LED indicates EFX Select Mode; non-illumination indicates Preset Select Mode. Controls and indicators perform different functions relative to the active mode.

Preset Select Mode (44)

In this mode‚ all three switches control effects presets. Their corresponding LEDs indicate which preset is active. Once desired settings are achieved utilizing the effects controls on the front panel‚ double-click one of the Preset switches (46‚ 48 or 50) to store the settings. For a detailed explanation on creating and storing presets‚ refer to the Tweak Features section on the next page.

Note: When entering the EFX select mode‚ the current preset will remain active.

Preset 1 (46)

In this mode‚ Preset 1 (46) mutes and un-mutes the signal completely. The Mute LED (47) will illuminate when the signal is muted.

Preset 2 (48)

Preset 2 (48) toggles between two effects and their respective settings. This button may be used as an on/off switch if one of the settings has no effects active. To use the Modulation LED (49) as a status indicator‚ the OFF (or lower setting) should be made with the LED dark and the ON (higher setting) made with the LED illuminated.

Preset 3 (50)

Preset 3 (50) toggles between two reverb and delay settings. As with effects settings‚ this switch may be used as an on/off switch for reverb and delay. Both functions change simultaneously when this switch is depressed.

10