Panasonic KX-PS8000 manual DCIS Stand Alone System, Setup

Setup

DCIS Stand Alone System

1

2

Make sure the scanner and printer are turned off.

Connect the SCSI cable provided to the scanner’s SCSI connector A or B and to the printer’s SCSI connector.

3	Make sure the terminator switches (#4) of the scanner and printer
	are set to ON.

1 2 3 4

ON

ON

1 2 3 4

Scanner Printer

BTo change a terminator setting, refer to page 52.

4	Connect the power cord to the scanner’s AC inlet and to an AC
	outlet.
5	Connect the other power cord to the printer’s AC inlet and to an
	AC outlet.

46