Panasonic KX-PS8000 manual Setup, BThe color density setting affects the average life of toner

Setup

4B	If you wish to adjust the density for each color independently,
	perform the following, then go to step 5.
	# Repeat instructions # through % of step 1 on page 70.
	$ Press the F button.
		Color Calibration
		CYAN
	% Press the ENTER button.
		CYAN
		0* (-10 to 10)

&Press the F/I button to darken/lighten the cyan color.

Pressing the F/I button twice selects the next/previous level setting.

(For example:)

BIf you wish to make the density setting darker by 4 levels:

Press the F button 8 times.

BIf you wish to make the density setting lighter by 2 levels:

Press the I button 4 times.

'Press the ENTER button.

Color Calibration

MAGENTA

(Repeat instructions % through ' for each color (MAGENTA, YELLOW, BLACK).

BTo skip a color, press the F button.

BTo return to a previous color, press the I button.

BBefore going to step 5, make sure the following is displayed.

Color Calibration

Calibration Test Print

5 Press the ENTER button to reprint the Color Calibration Page.

BThe line enclosure reflects the changes made to the settings.

BIf you are not satisfied with the current color density settings, repeat steps 4 and 5 above.

Notes:

BThe color density setting affects the average life of toner.

BSave the Color Calibration Card for future calibrations.

74