Panasonic KX-PS8000 manual Static Electricity Damage, Interface Cable, Waste Disposal Method

Before You Start

■CD-ROM

To prevent the CD-ROMs from accidental damages:

BDo not touch or write on the surface of the disc.

BDo not leave the disc out of the protective case.

BDo not leave the disc in direct sunlight or near heat sources.

BDo not place heavy objects on the disc case or drop the case.

BTo clean the disc, hold the disc by its edges and wipe it from the center to the edges with a dry, soft cloth.

■Static Electricity Damage

To prevent static electricity damage to any of the following components, touch a grounded metal surface, such as the printer’s bare metal frame prior to touching the component.

BThe interface connectors : SCSI, parallel and optional network

BADF interface connector

BElectrical components, connectors inside the printer and any components on the optional board (RAM Expansion Board or Ethernet Card)

BThe connector pins on the optional 2nd cassette feeder for the printer

■Interface Cable

Always use a shielded interface cable. Use of an unshielded cable can result in radio interference with data.

■Waste Disposal Method

Waste material may be dumped or incinerated under conditions which meet all federal, state and local environmental regulations.

13