Panasonic KX-PS8000 manual 111

Care and Maintenance

Caution:

BIf the fuser knob will not turn, do not force it, or you may damage the fuser. Instead, follow these steps:

a)Unlock the fuser by turning the small green thumbscrew counterclockwise.

b)Pull the fuser out. The media will probably tear.

c)Remove the oil supply roll.

d)Turn the fuser’s large green knob to release the jammed media.

e)Remove the jammed media from the fuser and the printer.

Safety Caution:

BThe fuser is hot; to avoid personal injury, turn off the printer and wait 10 minutes for the fuser to cool before touching it.

'Close the front door.

1B (Printing face up)

#Open the front door and the right side door.

$Turn the fuser’s large green knob counterclockwise to release the jammed media.

%Remove the jammed media from the right side of the printer.

$ %

#

&Close the front door.

'If the right side door is open, close it.

111