Panasonic KX-PS8000 manual Loading an Envelope, Loading Labels, Setup

Setup

■Loading an Envelope

Do not insert more than one envelope at a time. Only black text can be printed on envelopes. For more detailed information on envelopes, refer to page 153.

Note:

BThe envelope may be creased when printed.

1

2

3

4

Set the media thickness switch ( ☞ P. 38).

Adjust the media guides to the width of the envelope.

Insert the envelope with the short end entering the printer first and the printing side facing up. The edge where the stamp is located enters the printer last.

Use the printer driver to select Envelope in the Paper size menu and the Paper source menu.

■Loading Labels

For detailed information on labels, refer to page 152.

1Set the media thickness switch ( ☞ P. 38).

2Adjust the media guides to the width of the label sheets.

3Insert the label sheets in the multi-purpose tray with the printing side up and the top of the sheets enter first.

The height of labels should not exceed the limit mark on the guide.

4Use the printer driver or the scanner panel ( ☞ P. 84) to select Label.

41